Protect your animals: keep the wolf at bay with an electric fence

Protecting livestock and sheep from wolves

Since 2017, wolves have been regularly spotted in the Netherlands. Wolves cause a lot of nuisance and unrest among livestock and sheep farmers. Over the past week, there have been multiple reports from Drenthe about livestock farmers finding dead animals, likely due to the actions of the wolf. In the southern part of the country, it has already been confirmed that animals have been killed by a wolf.

How can you best combat wolves?

There are now many questions about how to best combat wolves. At this moment, wolves are protected in the Netherlands, which means they cannot be shot. Experts, therefore, advise using a good electric fence to protect your livestock as much as possible. Wolves are particularly sensitive to electric fences because, unlike hooved animals, they have direct contact with the ground. As a result, they feel the shock more intensely. In this article, we will explain what to consider when setting up a fence to deter wolves.

Deterring wolves with electric fencing

Standard fences often do not provide adequate protection against wolves due to their limited height. To deter a wolf, Gallagher recommends the following for the most optimal results:

1. Minimum fence height of 1.20 meters

The new Line Post is perfectly suitable for this purpose!

2. Use 5 - 7 horizontal electric wires

Pay attention to the quantity and type of conductive wires in the conductor. The more, the better the conduction, ensuring consistent power throughout your fence.

3. Use a powerful electric fence energizer

For wolves, it is advised that there should be a minimum of 4.5 Kilovolts on the fence. It is better to choose an energizer designed for a longer distance than you need. This way, you can ensure that there is no power loss due to high vegetation, as the energizer will burn away the vegetation.

4. Replace the top wire with electric tape

This is even more visible and will make the wolf turn back even sooner. We especially recommend this for mobile fences.

5. Use a Fox light as an addition to your fence

With the Fox light on your fence, you create the illusion that someone is patrolling the area, thanks to the light flashes emitted by the Fox light. This will keep the wolf away from your fence.

We offer both permanent and mobile solutions to deter wolves from your sheep or livestock. You can find more information about the types and benefits on our website on the wolf page.

Important: Check your wolf fence to keep it safe, once your wolf fence is installed, it does not mean you can ignore it. It is crucial to ensure the safety of your livestock by regularly maintaining the installed fence and checking it.

Wolves like to search for gaps and openings in the fence. They not only try to go over a fence but also through it. Therefore, check if all wires are taut and in their original positions.

It is also important that your electric fence energizer works well and is strong enough to provide power to your entire fence. Therefore, regularly check at multiple points (including the back of the field) with an electric fence tester to ensure that there is sufficient power (at least 4.5 kV against wolves) on your fence. Without power, your fence is not safe for your livestock, as the wolf knows how to find the weak spots in your fence.

Would you like to quickly check your entire fence?

Then use the Gallagher check to go through everything step by step.

Alarm system for the i Series
Use with i Series fence energisers to monitor a section of fence and drive external flashlights and/or a siren if the circuit is broken eg: a gate opened or a wire cut. Read everything about the i Series here

£369.00*
Fence monitor for the i Series
Add up to six fence monitors on your i Series fence system to turn it into a fully monitored set up that keeps the external display constantly up to date with fence performance. The monitor identifies when any zone has a fault and reports back alarms to the energiser, external display and to the (optional) SMS module. Compatible with the M1800i and the M2800i i Series energisers. Comes with a 2- year product warranty. Read everything about the i Series here

£289.00*
7 years warranty
Gallagher M5000i Fence Energiser
The M5000i is an extremely powerful, intelligent fence energiser that is suitable for multiple wire fences up to 100 km. A unique aspect of i-series energisers is the external display - which shows all of your fence information (e.g. voltage, faults and fault location) in a convenient location up to *50 metres from the energiser. *(3m wire included) The energiser can also be operated and turned on/off from the external display and you get immediate notification of power loss e.g if a branch has fallen onto the fence or a wire has been cut.  You switch off the fencing on site with the remote control (optional) and repair the fault quickly, you then use the optional remote control to switch the fencing on again. The Gallagher M5000i can be expanded with various i Series accessories, including an i Series alarm system, flashing light, siren, maximum 6 fencing monitor(s) and an SMS module. Specifications: Maximum output voltage (V): 9000 Charging energy (J): 19 Maximum impulse energy (J): 15 Number of earthing rods required: 8 x 2 m No vegetation (km) (recommended): 100 Light vegetation (km) (recommended): 60 Dense vegetation (km) (recommended): 26 Fence surface (ha) (recommended): 160

£2,239.00*
7 years warranty
Gallagher MBS2800i fence energiser
The most powerful and most intelligent Gallagher battery energiser in the market - that is the MBS2800i. This strong energiser provides enough power for fencing of up to 80km. This energiser can be used with a battery and a solar panel or it can be connected to the mains. The energiser is versatile in use and provides optimum control over the performance of your fencing. With the external display you can read out the performance and with the extra accessories you can expand the control over your fencing even further. + Free Remote! Read everything about the i Series here A unique aspect of i Series energisers is the external display - which shows all of your fence information (e.g. voltage, faults and fault location) in a convenient location up to *50 metres from the energiser. *(3m wire included) The energiser can also be operated and turned on/off from the external display and you get immediate notification of power loss e.g if a branch has fallen onto the fence or a wire has been cut.  You switch off the fencing on site with the remote control (optional) and repair the fault quickly, you then use the optional remote control to switch the fencing on again. The Gallagher MBS2800i can be expanded with various i- Series accessories, including an i Series alarm system, flashing light, siren, maximum 6 fencing monitor(s) and an SMS module. Specifications: Maximum output voltage (V): 7000 Charging energy (J): 21 Maximum impulse energy (J): 14 Number of earthing rods required: 6 x 2 m No vegetation (km) (recommended): 80 Light vegetation (km) (recommended): 53 Dense vegetation (km) (recommended): 20 Fence surface (ha) (recommended): 120

£1,199.00*
7 years warranty
MBS1800i fence energiser
The flexibility of a multi-power energiser, combined with the power and intelligence of the i Series. The MBS1800i energiser is suitable for fencing up to a length of 65km. The energiser provides information about the performance of the energiser on the supplied external display, so you can always see whether there is enough voltage on the fencing. The multi-power option makes this energiser suitable for use with a battery, a solar panel, or mains. There are also plenty of optional accessories to give you even more insight into the performance of your fencing. A versatile and reliable energiser. Read everything about the i Series here The energiser has adaptive control, meaning that if it detects a short on the fence it will automatically increase the charge to compensate, ensuring reliable, high performance livestock control.  A unique aspect of i Series energisers is the external display - which shows all of your fence information (e.g. voltage, faults and fault location) in a convenient location up to *50 metres from the energiser. *(3m wire included) The energiser can also be operated and turned on/off from the external display and you get immediate notification of power loss e.g. if a branch has fallen onto the fence or a wire has been cut.  You switch off the fencing on site with the (optional available) remote control and repair the fault quickly, you then use the remote control to switch the fencing on again. The Gallagher MBS1800i can be expanded with various i Series accessories, including an i Series alarm system, flashing light, fencing monitor(s) and an SMS module. Specifications: Maximum output voltage (V): 7000 Charging energy (J): 14 Maximum impulse energy (J): 10 Number of earthing rods required: 5 x 2 m No vegetation (km) (recommended): 65 Light vegetation (km) (recommended): 43 Dense vegetation (km) (recommended): 17 Fence surface (ha) (recommended): 75

£899.00*
Remote control for the i Series
The i Series Remote Control accurately measures fence voltages and current and finds the exact location of a fence fault quickly and easily. Once the fault is located the energiser can be turned off/ on remotely, to allow safe and convenient fence repair. The remote control is rugged and reliable with a tough, water resistant casing design. Comes with a 2- year product warranty. Read everything about the i Series here

£329.00*